Free CAD drawings (DWG) of the most common door types with the Marix concealed floor closer. Use them as blocks in your architecture, millwork or glazing projects.
How to use the drawings
- Download the DWG for the door type you need.
- Open it in AutoCAD or any CAD software that reads DWG, or insert it as a block.
- Check the door and opening sizes in your project and scale if needed.
- Use the Marix closer drawing to place the pivot axis and plan the floor and door-top cutouts.
Downloads
- Swing door (Marix EDGE) – DWG
- Pivot door – DWG
- Double-action (swing both ways) door – DWG
- Center pivot door – DWG
- Saloon-style pivot door – DWG
- Folding door (Marix EDGE) – DWG
- Bi-fold / pantograph door (Marix EDGE) – DWG
- Revolving door – DWG
- Double swing door (Marix EDGE) – DWG
- Saloon door (Marix EDGE) – DWG
Before you detail the project
Tempered glass can’t be cut or drilled after tempering, so every cutout must be on the drawing you send to the glass shop. Pick the closer by door weight (110, 260, 330 or 550 lb) and check the glass door installation guide.
- 304 stainless steel body, fully shielded and maintenance-free
- Sintered steel mechanism with a chrome-silicon drive
- Doors up to 550 lb; door width up to 8 ft with a center pivot
- Opens both ways and stops every 90°; rotates 360° when installed at the center
- 3-piece stainless hardware kit + cardboard template in the box
- About 30 minutes to install • 5-year warranty
FAQ
Are the drawings free?
Yes, free to download and use in your projects.
Which software opens DWG files?
AutoCAD and most CAD programs read DWG. You can also insert the file as a block in your drawing.
Can’t find the drawing you need?
Contact us and tell us the door type.