Before heading to the job site, check that you have everything you need to install a concealed floor closer. Missing one tool usually means a second trip.
Measuring and marking
- 16 ft tape measure
- Center plumb bob and plumb line
- Level
- Marker
Drilling the floor
- Hammer drill
- Diamond hole saw 1-9/16″ (40 mm)
- Carbide bits 1/4″ and 5/16″ (6 and 8 mm)
- Shop vac and water to cool the bit
Fastening and adjusting
- Flat and Phillips screwdrivers
- Wrenches 5/8″ and 3/8″ (15 and 10 mm)
- Allen keys
- Wedge shims (for glass doors)
The 3 rules that avoid rework
- Measure the opening at 3 points and use the smallest number.
- Line up the top pivot with the closer using the plumb bob.
- Do the final tightening with the door closed, in a cross pattern.
Step by step: Marix installation guide. Average install time: about 30 minutes.
FAQ
What size hole does the Marix closer need?
A 1-9/16″ (40 mm) hole made with a diamond hole saw, cooled with water.
Does it come with a template?
Yes. The box includes a cardboard template to mark the holes for the closer and the screws.
How long does it take?
About 30 minutes on average.