Before heading to the job site, check that you have everything you need to install a concealed floor closer. Missing one tool usually means a second trip.

Installer checklist

Measuring and marking

  • 16 ft tape measure
  • Center plumb bob and plumb line
  • Level
  • Marker

Drilling the floor

  • Hammer drill
  • Diamond hole saw 1-9/16″ (40 mm)
  • Carbide bits 1/4″ and 5/16″ (6 and 8 mm)
  • Shop vac and water to cool the bit

Fastening and adjusting

  • Flat and Phillips screwdrivers
  • Wrenches 5/8″ and 3/8″ (15 and 10 mm)
  • Allen keys
  • Wedge shims (for glass doors)

The 3 rules that avoid rework

  1. Measure the opening at 3 points and use the smallest number.
  2. Line up the top pivot with the closer using the plumb bob.
  3. Do the final tightening with the door closed, in a cross pattern.
Tighten with the door closed

Step by step: Marix installation guide. Average install time: about 30 minutes.

FAQ

What size hole does the Marix closer need?

A 1-9/16″ (40 mm) hole made with a diamond hole saw, cooled with water.

Does it come with a template?

Yes. The box includes a cardboard template to mark the holes for the closer and the screws.

How long does it take?

About 30 minutes on average.